CoreHW

Analog and Mixed-Signal IC Design Services

CoreHW develops custom analog and mixed-signal IP, circuit blocks and ASICs for power management, data conversion, clocking, interfaces and sensor readout—from design and layout to silicon.

Flexible scope

Full-chip or partial-chip projects

Company-wide process experience

FinFET, FD-SOI, CMOS and CMOS BCD

120+

Tape-outs

FLEXIBLE PROJECT SCOPE

From Individual Analog IP to Complete Mixed-Signal ASICs

CoreHW supports custom IC development at the level your project requires: a standalone analog block, a partial-chip assignment or a complete mixed-signal ASIC.

Depending on scope, support can extend from specification and circuit design through layout, integration, verification and productization. CoreHW can also customize and integrate existing silicon-proven IP using black-box or white-box models.

DESIGN CAPABILITIES

Analog and Mixed-Signal Design Domains

Power Management

DC-DC (DCDC) converters, including step-down and step-up topologies; positive- and negative-voltage low-dropout regulators (LDOs); and charge pumps.

Data Converters

Analog-to-digital converters (ADCs), including SAR and sigma-delta architectures, and digital-to-analog converters (DACs), including resistive and capacitive implementations.

Clocking and Frequency Generation

Phase-locked loops (PLLs), voltage-controlled oscillators (VCOs), clock generators and supporting clock-system circuits.

Digital Control and Interfaces

Digital control for mixed-signal ICs and interfaces including LVDS, SLVS, Inter-Integrated Circuit (I²C/I2C) and Serial Peripheral Interface (SPI).

References and General-Purpose Analog IP

Bandgaps, voltage and current references, temperature sensors, comparators, operational amplifiers, bias circuits and multiplexers.

Photon Counting and Sensor Readout

Imaging ICs, LiDAR and X-ray circuits, pixel arrays, photon-counting functions and readout circuits.

ENGINEERING PRIORITIES

Design Targets Defined by Your Application

Depending on the project, design targets can include ultra-low-power operation, low noise, high performance and compact silicon area. The required balance is set by the target specification, application and selected process technology.

Advantages of CoreHW Design Service

Low Power Consumption

Energy efficiency for extended battery life

Low Noise

Improved signal accuracy and quality

Diverse Process Technologies

Enhancing flexibility and optimizing performance

High Performance

Optimized designs ensuring high efficiency and signal quality

Compact Form Factor

Optimized for specific applications

DEVELOPMENT FLOW

A Structured Path from Specification to Silicon

  1. Requirements and specification

    Define the target requirements and detailed IP or ASIC specification.

  2. Circuit design and simulation

    Develop the schematic and verify performance at circuit and block level.

  3. Layout, integration and verification

    Complete layout and layout-level simulation, design-rule checking (DRC), layout-versus-schematic (LVS) checks, and mixed-signal verification using real-number models or Verilog-AMS where appropriate.

  4. Silicon and productization

    As agreed, continue through fabrication, test boards and software, characterization, qualification, production and quality assurance.

TECHNOLOGY AND APPLICATIONS

Process Experience for Different Design Requirements

CoreHW offers company-wide experience in

  • 5–14 nm FinFET,
  • 22 nm FD-SOI,
  • CMOS at 16, 40, 55, 90 and 180 nm,
  • CMOS BCD at 130, 150 and 180 nm.

The process and node are selected for the project requirements.

Application Experience

Industrial automation and custom control electronics

Industrial

Automotive electronics and custom ASIC systems

Automotive

Healthcare and medical-device electronics

Medical

Telecommunications infrastructure and wireless RF systems

Telecommunications

Semiconductor wafer for custom ASIC development

Semiconductor

Design for Demanding Environments

Autonomous robotics and defense electronics platforms

Defense and Autonomous Systems

Analog, data-converter, clocking and power-management design for electronics exposed to vibration, temperature extremes and electromagnetic interference.

Satellite and space RF electronics

Space Systems

Radiation-tolerant analog, data-converter, clocking and power-management design for space applications.

SELECTED WORK

Selected Analog and Mixed-Signal Work

CoreHW 16-bit SAR ADC for image sensing

16-Bit SAR ADC for Image Sensing

CoreHW developed a high-resolution SAR ADC for a compact image-sensing platform.

Key details

  • 16-bit resolution
  • Sampling rate up to 1 MS/s
  • X-FAB 180 nm CMOS process
  • Designed for accurate, power-efficient signal acquisition
CoreHW 5 A buck DC-DC converter IP

5 A Buck DC-DC Converter

CoreHW developed silicon-proven power-management IP using TSMC 0.18 µm BCD technology.

Key details

  • 4.25–15 V input range
  • 0.60–1.43 V regulated output
  • Constant-on-time switching
  • Support for multiphase configurations

DESIGN ENVIRONMENT

Professional IC Design Tools

  • Cadence design tools logo

    Cadence

  • Synopsys design tools logo

    Synopsys

  • SIMPLIS

    SIMPLIS

FREQUENTLY ASKED QUESTIONS

Analog and Mixed-Signal IC Design FAQs

Yes. CoreHW supports IP integration, verification, productization and customization through black-box and white-box models. Suitability, required changes and verification are assessed for the target application and process.

START YOUR PROJECT

Discuss Your Analog or Mixed-Signal IC Requirements

Bring your target requirements to CoreHW’s IC design team. Share the required function, target performance, power and area constraints, interfaces, preferred process if known, and intended delivery scope.